[TriLUG] [OT] Weird hardware power problem
Daniel T. Chen
crimsun at email.unc.edu
Wed Aug 15 16:41:04 EDT 2001
Sounds like you might have a short...my roommate just replaced his
motherboard after having the exact symptoms you listed. Make sure you
don't have any loose screws playing around in the case.
---
Dan Chen crimsun at email.unc.edu
GPG key: www.cs.unc.edu/~chenda/pubkey.gpg.asc
On Tue, 14 Aug 2001, Bill Vinson wrote:
> Weird hardware problem I am having. I have an old machine (K6-233) that
> I just changed out from 48MB in 4 SIMMs to 128MB SDRAM PC133 (Machine
> was not designed for PC133, but isn't backward compatible hw grand)
>
> However, now everything works....detects the ram, but during boot the
> system just powers off. It is as if the power is just cut out from
> under it. Never seen this with this machine before but it has been
> awhile since I have used it. Any ideas on what to check? Looked at
> power connectors internal and external, but I am just stumped. No
> beeps, no errors, just stops and powers off.
More information about the TriLUG
mailing list