[TriLUG] New PCMCIA NIC

Chris Knowles knowlesc at telocity.com
Tue Jul 2 17:52:56 EDT 2002


Well, I've got a card that says almost this exact thing, goes 'bloop'
(The failed to load drivers beep) and then, get this, it works!

The lack of even a bloop worries me though.  Looks like your slot is ok,
your card is ok, but you don't have the drivers.  

The pcmcia website (someone else posted it) is probably where you want
to go.

CJK

On Tue, 2002-07-02 at 17:25, Justin Johnson wrote:
> 
> Here is the output from /var/log/messages when the card is inserted.
> 
> Jul  2 01:59:14 LinuxLaptop kernel: cs: cb_alloc(bus 21): vendor 0x1317,
> device 0x1985
> Jul  2 01:59:14 LinuxLaptop kernel: PCI: Enabling device 15:00.0 (0000 ->
> 0003)
> Jul  2 01:59:14 LinuxLaptop kernel: PCI: Setting latency timer of device
> 15:00.0 to 64
> Jul  2 01:59:14 LinuxLaptop kernel: eth0: ADMtek Comet rev 17 at 0xc88b7000,
> 00:10:7A:69:69:13, IRQ 11.
> Jul  2 01:59:14 LinuxLaptop cardmgr[762]: initializing socket 1
> Jul  2 01:59:14 LinuxLaptop cardmgr[762]: unsupported card in socket 1
> Jul  2 01:59:14 LinuxLaptop cardmgr[762]:   product info: "N"
> 
> So would this indicate that the card is in fact incompatable, or is that
> just due to lack of drivers?
> 
> Thanks,
> Justin
> 
> _______________________________________________
> TriLUG mailing list
>     http://www.trilug.org/mailman/listinfo/trilug
> TriLUG Organizational FAQ:
>     http://www.trilug.org/~lovelace/faq/TriLUG-faq.html




More information about the TriLUG mailing list