[TriLUG] getting RH 7.1 to see new nics

[Jon Carnes]

On Tue, 2004-04-20 at 12:03, Dan wrote:
> I have a Proliant ML370 server that has an on-board NIC... we needed more 
> interfaces so we have added 3 Netgear GA302T adapters to the system but the 
> kernel doesn't see the new cards... it still only sees eth0 at boot.  The 
> cards have a link light and see network traffic.  What can I do to get the 
> kernel to see the cards?
> 
> 
> -- 
> Dan

Try the TG3 driver. The bcm5700 drivers from BroadCom are also supposed
to work, but you'll have to compile them yourself for Fedora.

Good Luck - Jon Carnes