[TriLUG] EMC SAN w/ Linux Configuration

[Justin L. Skinner]

Excellent! Congratulations!

Kinda what we went through, slightly different setup but I believe it was emulex/IBM 345s, Suse, sym8x10 and brocade fabric..this was about 1 1/2 years ago

cheers,
 

Justin L. Skinner 
bofh "AT" speakeasy.net 
http://www.180MPH.com


-----Original Message-----
From: Ron Joffe [mailto:rjoffe at yahoo.com]
Sent: Saturday, September 4, 2004 02:54 AM
To: 'Triangle Linux Users Group discussion list'
Subject: Re: [TriLUG] EMC SAN w/ Linux Configuration

Folks,

We have successfully implemented a diskless server solution using an EMC 
Clarion CX500 SAN.

It took allot of struggles, a couple of 16 hour days, and we almost wore out a 
set of instellation media. We are still working out some details. We are 
putting together a document to detail our solution. It should be out next 
week sometimes.

Currently we have a SuSE SLES-8 Server running 100% Bootless :) It's very 
cool, and quite fast.

Justin,

We are using Emulex Cards, HP DL380's and a switched point to point meshed  
network. Dual Emulex cards, dual switching networks, and dual CX500's with 
two service processors each.

Ron


-- 
TriLUG mailing list        : http://www.trilug.org/mailman/listinfo/trilug
TriLUG Organizational FAQ  : http://trilug.org/faq/
TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
TriLUG PGP Keyring         : http://trilug.org/~chrish/trilug.asc