[TriLUG] OT: AM antenna, and RG-58
Rick DeNatale
rick.denatale at gmail.com
Wed Feb 23 17:21:44 EST 2005
I'm not sure that a directional loop is what I'm looking for. I'm not
really wanting to do AM DXing, just get the local AM stations clearly
by locating the antenna away from the equipment which is colocated
with the receiver.
On Wed, 23 Feb 2005 14:39:44 -0500, sjackson at radarfind.com
<sjackson at radarfind.com> wrote:
> On the subject of an AM broadcast antenna, Rick DeNatalie wrote:
>
> "I'm really looking for something which can go in my attic. As I said
> previously I've already got a couple of RG-6 cables and one 300 ohm
> twin-lead from the attic down to the cabinet where the receiver is
> installed. I guess some kind of lightning protection would be in order as
> well."
>
> Rick --
> Because the most effective AM antenna for your application would be a
> directional loop, I suggest that you not install it in your attic, unless
> you want to listen to only one station.
>
> You can easily build an antenna at home out of discarded junque. This
> Australian ham operator did just that:
>
> http://www.vk2zay.net/article.php/47
>
> Or, you can buy a kit of parts fairly reasonably:
>
> http://www.mtmscientific.com/loop.html
>
> Hope this helps. E-mail me direct if it doesn't, as this sort of thing is
> grossly OT.
>
> To the fellow with the wireless mics:
>
> I have lots of RG-58 which is cheap and easy to buy ... It's the connectors
> (and more specifically, installing them) that is best left to somebody who
> does such things regularly. Fortunately, I do.
>
> I've thrown away many cables like you are looking for. Sorry, but there
> wasn't a use (or space) for them any longer. You can get these for
> next-to-nothing at hamfests, but, you have to go to the hamfests! Richmond
> was last Sunday, Kinston is coming up soon, and Charlotte is soon
> thereafter. Might be cheaper to just have me make two jumpers up for you.
> Two, 20' one-end BNC male terminated RG-58 jumpers would be $9 each ($4 for
> the cable and $5 for the connector).
>
> My suggestion is that you get the largest and most shallow steel baking pan
> you can find, used or new. Aluminum would be OK if it's of a heavy enough
> gauge. Make sure it's at least 2 feet long and a foot wide, and 3 or so
> inches deep. Should be pretty cheap at WalMart or your local thrift store.
> Get two.
>
> You'll need two panel-mount BNC panel mount female connectors, like
> RadioShack #278-105. Drill a hole in the middle each of the baking pans to
> fit the connector, and mount it, with the solder lug on the inside. Bring
> this to my office at 2 Davis Drive in RTP, and I'll correctly terminate the
> cable into the connector for you. I can also check the antenna VSWR to
> make sure you're picking up the maximum possible signal.
>
> Like I said: this is simple stuff, if you do it all the time. I couldn't
> discern a cron job from a con job. But build a radio from a broken TV set,
> that's me.
>
> --
> TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
> TriLUG Organizational FAQ : http://trilug.org/faq/
> TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
> TriLUG PGP Keyring : http://trilug.org/~chrish/trilug.asc
>
More information about the TriLUG
mailing list