[TriLUG] retrieving tar backups from solaris 8mm drives
sholton at mindspring.com
sholton at mindspring.com
Tue Nov 1 13:32:59 EST 2005
Other errors I've seen using tapes:
1. using a no-rewind device and a tape that needs to be rewound.
2. drive broke/mis adjusted/needs cleaning.
Can you make and retrieve a tar backup of something onto another tape
using the linux box and drive to rule out local system problems.
-----Original Message-----
From: Glenn Hennessee <Glenn_Hennessee at ncsu.edu>
Sent: Nov 1, 2005 1:10 PM
To: Triangle Linux Users Group discussion list <trilug at trilug.org>
Subject: Re: [TriLUG] retrieving tar backups from solaris 8mm drives
Is it the same physical drive moved to a linux box or a different drive?
Maybe the old drive used hardware compression which the new drive
doesn't do or software compression (tar -czvf ) was used so now you
would need tar -tzf /dev/st0 (or whatever your tape device is). Just
some thoughts, none guaranteed to be correct.
glenn
Doug_Newcomb at fws.gov wrote:
> I get input/output error at beginning of tape, exiting now :-( with both
> /dev/nst0 and /dev/st0
>
>
>
>>I would think tar should be tar - what happens when you do:
>
>
>>tar tvf /dev/nst0
>
>
>>with the dape in the drive?
>>ap
>
> Doug Newcomb
> USFWS
> Raleigh, NC
> 919-856-4520 ext. 14 doug_newcomb at fws.gov
> ---------------------------------------------------------------------------------------------------------
>
> The opinions I express are my own and are not representative of the
> official policy of the U.S.Fish and Wildlife Service or Dept. of Interior.
> I left my signature file in /dev/null
>
--
TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
TriLUG Organizational FAQ : http://trilug.org/faq/
TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
--
Steve Holton
sholton at mindspring.com
"Convenience causes blindness. Think about it."
More information about the TriLUG
mailing list