[TriLUG] Cross-post: OpenVPN problem: no route to host
Jason
jason at monsterjam.org
Fri Jun 2 13:38:43 EDT 2006
sounds like youre using transport mode instead of tunnel mode.
either that, or you need to add a some routes for the remote networks
after you connect.
Jason
On Fri, Jun 02, 2006 at 01:15:16PM -0400, Brian Henning wrote:
> Hi Gang,
> Throwing more hooks in more ponds in hopes of getting more help
> faster.. I posted this message to the openvpn-users list as well;
> apologies to members of both lists who see this twice.
>
> Anyway...
>
> I've just recently (read: yesterday!) set up OpenVPN in bridging mode
> on a Fedora Core 3 server, connecting a single remote XP Pro client
> computer into our main network. I've followed the HOWTO, and read the
> Bridging Mini-HOWTO, as well as the FAQs, and am left with a problem.
>
> Both the server and client OpenVPN instances appear to start up and
> handshake without problem. Once the connection is established, I can
> ping all over the place, both from the client to any host on the main
> network, and from any host on the main network to the remote client.
>
> Then the problems start. I can (apparently) establish TCP connections
> to various services running on the server itself (the one that also
> serves the OpenVPN connection), and from the server back to the client.
> What I can't seem to do is establish TCP connections to other machines
> on the network from the client, or from other machines on the network
> back to the client.
>
> Here's some background info and examples of my problem.
>
> Server: 192.168.1.125
> - tap0 interface is wide open firewall-wise, and
> - tap0 is bridged with eth0 on bridge device br0
> My workstation: 192.168.1.32
> Another subnet host running a custom service: 192.168.1.44
> Local IP assigned to remote VPN client: 192.168.1.200
>
>
> (on the server itself)
> % rdesktop 192.168.1.200
> ...works perfectly
>
> (on my workstation)
> % ping 192.168.1.200
> .. successful ping stats ..
> % rdesktop 192.168.1.200
> ERROR: connect: No route to host
>
> (on remote client)
> C:\> telnet 192.168.1.125 25
> ... successful conversation with SMTP running on server ...
> C:\> telnet 192.168.1.44 9090
> Connecting To 192.168.1.44...Could not open connection to the host, on
> port 9090: Connect failed
>
>
> The confounding factor is I CAN apparently successfully establish an SSH
> session from remote client to any ssh-serving host on the local network,
> and isn't SSH a TCP connection? I'm not sure what's going wrong here.
>
> I can also NET VIEW a small handful of the machines on the local net
> from the client, but far fewer than from any random local machine,
> getting System Error 5 from most hosts.
>
> Clearly I'm running into holes in my understanding of how these
> networking things all work together. It's probably some small
> firewalling or configuration issue I'm missing.. I'll be happy to
> supply configs and log output upon request.
>
>
> Tremendous thanks in advance for the kind assistance!
>
> Cheers,
> ~Brian
>
> -- ---------------- Brian A. Henning strutmasters.com 336.597.2397x238
> ---------------- _______________________________________________
> Openvpn-users mailing list Openvpn-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openvpn-users
> --
> ----------------
> Brian A. Henning
> strutmasters.com
> 336.597.2397x238
> ----------------
> --
> TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
> TriLUG Organizational FAQ : http://trilug.org/faq/
> TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
--
================================================
| Jason Welsh jason at monsterjam.org |
| http://monsterjam.org DSS PGP: 0x5E30CC98 |
| gpg key: http://monsterjam.org/gpg/ |
================================================
More information about the TriLUG
mailing list