[TriLUG] TWC in RTP - 30/5 for $54.95/mo

[Neil L. Little]

Or maybe reflash the WRT45G with tomato. Unless its a later router with 
the vx processor.

73,
Neil, WA4AZL


John Turner wrote:
> Okay. Things are sorta working. I am getting 4.5Mbps up but stuck
> around 23Mbps down. Right now I have the cable modem in bridge mode
> and using an old WRT54G router. My thought is the WRT54g is capped
> around 23Mbps bandwidth, so my questions are
>
> (a) can I switch back to using the modem in NAT mode and still have
> support for port fowarding/etc that I have now on the WRT54g
>
> or
>
> (b) what newer routers support 30-50Mbps bandwidths?
>
>
> On Tue, Apr 12, 2011 at 12:05 PM, John Turner <ukcsgrad89 at gmail.com> wrote:
>   
>> So I got my new modem installed but it seems to want a login/password
>> and I wasn't told that info.
>> I want to change it to bridge mode so I can keep using my current setup.
>>
>> On Sun, Apr 10, 2011 at 6:43 PM, Amnon <amnon at deltaforce.net> wrote:
>>     
>>> You can do it yourself.  Just go to 192.168.0.1/TlModeChange.asp  (if it is
>>> already in bridge mode, 192.168.100.1)
>>>
>>>       
>>>> Also, I did a little research prior to my install and found that you
>>>> can put the Ubee in pass-thru/bridged mode, but you have to go through
>>>> support to do it.  I requested this configuration and my installer
>>>> called it in.  I'm using my own wireless, so no loss there.  Now the
>>>> TWC device is a dumb cable modem.
>>>>         
>>> --
>>> This message was sent to: John Turner <ukcsgrad89 at gmail.com>
>>> To unsubscribe, send a blank message to trilug-leave at trilug.org from that
>>> address.
>>> TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
>>> Unsubscribe or edit options on the web  :
>>> http://www.trilug.org/mailman/options/trilug/ukcsgrad89%40gmail.com
>>> TriLUG FAQ          : http://www.trilug.org/wiki/Frequently_Asked_Questions
>>>
>>>