[TriLUG] Storage server diy

Hariharan Gopalan via TriLUG trilug at trilug.org
Fri Aug 2 17:08:51 EDT 2019


What about SAS 12GB/s SSD drives? Do they help improve performance? Also,
do SSD drives have 4Kn versions? or are these only for the conventional
drives with platters?

On Fri, Aug 2, 2019 at 5:06 PM William Sutton <william at trilug.org> wrote:

> I've had good luck with several generations of IBM (later HDS) hard
> drives, some lasting a decade or more in continuous operation.
>
> William Sutton
>
> On Fri, 2 Aug 2019, Wes Garrison via TriLUG wrote:
>
> > I've done this several times over the last few years, and I'd be happy to
> > help
> >
> > Generally, depending on size, I think ZFS on Debian or *buntu is the best
> > thing going, with 2x or 3x fault tolerance.
> >
> > 10TiB drives are the best bang for the buck right now as far as $/GB is
> > concerned.  You definitely want to get the NAS variant of drives, like WD
> > Red or Hitachi/HGST NAS.
> >
> > Regular drives aren't meant to run 24x7, and they fail at very high
> rates.
> >
> > I'd look at something like the Norco enclosures for this as well:
> > https://www.newegg.com/norco-ds-12d/p/N82E16816133044
> >
> https://www.amazon.com/Silverstone-3-5-Inch-Hot-Swap-Rackmount-RM212/dp/B00S0M4D8U/
> >
> >
> > These are the cheap ones, and you may want to replace with quieter fans,
> > check solder joints, etc. unless you have the budget for expensive cases.
> > _________________________________
> > Wesley S. Garrison
> > Network Engineer
> > Xitech Communications, Inc.
> > phone:  (919) 260-0803
> > fax:       (919) 932-5051
> > __________________________________
> > "Lead us not into temptation, but deliver us from email."
> >
> >
> > On Fri, Aug 2, 2019 at 4:07 PM Hariharan Gopalan via TriLUG <
> > trilug at trilug.org> wrote:
> >
> >> Is there any storage server expert in the group who can help me with
> this?
> >>
> >> Thanks
> >> Hari
> >> --
> >> This message was sent to: Wes <wes at xitechusa.com>
> >> To unsubscribe, send a blank message to trilug-leave at trilug.org from
> that
> >> address.
> >> TriLUG mailing list : https://www.trilug.org/mailman/listinfo/trilug
> >> Unsubscribe or edit options on the web  :
> >> https://www.trilug.org/mailman/options/trilug/wes%40xitechusa.com
> >> Welcome to TriLUG: https://trilug.org/welcome
> > --
> > This message was sent to: William <william at trilug.org>
> > To unsubscribe, send a blank message to trilug-leave at trilug.org from
> that address.
> > TriLUG mailing list : https://www.trilug.org/mailman/listinfo/trilug
> > Unsubscribe or edit options on the web        :
> https://www.trilug.org/mailman/options/trilug/william%40trilug.org
> > Welcome to TriLUG: https://trilug.org/welcome
>


More information about the TriLUG mailing list