[TriLUG] Medium distance Internet

[Mauricio Tavares via TriLUG]

On Fri, Jul 7, 2023 at 12:15 AM Wes Garrison via TriLUG
<trilug at trilug.org> wrote:
>
> Here's what I use to bury cable:
> https://photos.app.goo.gl/MqFZtHdTqZYfrbWy7
>
> :)
>
      What is wrong with ice cream spoons stolen off McDonalds?

>
>
> On Thu, Jul 6, 2023 at 10:12 PM Brian Bouterse via TriLUG <trilug at trilug.org>
> wrote:
>
> > Burying cable is way easier with the tool below. Well worth the money even
> > if you use it once (which you'll use it more than that).
> >
> > https://www.wiltonthinlinetrenchingspades.com/
> >
> > Buy direct bury copper cable (not CCA). If you look at the cost and
> > complexity of wireless solutions this was both cheaper and easier
> > considering you have to run cables to the outside point to point equipment.
> >
> >
> >
> > On Thu, Jul 6, 2023, 4:49 PM Joseph Mack NA3T via TriLUG <
> > trilug at trilug.org>
> > wrote:
> >
> > > On Thu, 6 Jul 2023, Mauricio Tavares wrote:
> > >
> > > >> you'll have a lot of problems with lightning induced spikes at each
> > end
> > > of
> > > >> the line. Even electrostatic spikes on a clear day will require you to
> > > >> keep rebooting your waps.
> > > >>
> > > >      Fibre FTW
> > >
> > > I forget. I've never done fibre. (back in my day ...)
> > >
> > > Thanks Joe
> > >
> > > --
> > > Joseph Mack NA3T EME(B,D), FM05lw North Carolina
> > > Don't upgrade a working machine - it won't work any
> > > better - it could work worse; it may not work at all.
> > > Homepage http://www.austintek.com/ It's GNU/Linux!
> > >
> > > --
> > > This message was sent to: bmbouter at gmail.com <bmbouter at gmail.com>
> > > To unsubscribe, send a blank message to trilug-leave at trilug.org from
> > that
> > > address.
> > > TriLUG mailing list : https://www.trilug.org/mailman/listinfo/trilug
> > > Unsubscribe or edit options on the web  :
> > > https://www.trilug.org/mailman/options/trilug/bmbouter%40gmail.com
> > > Welcome to TriLUG: https://trilug.org/welcome
> > --
> > This message was sent to: Wes <wes at xitechusa.com>
> > To unsubscribe, send a blank message to trilug-leave at trilug.org from that
> > address.
> > TriLUG mailing list : https://www.trilug.org/mailman/listinfo/trilug
> > Unsubscribe or edit options on the web  :
> > https://www.trilug.org/mailman/options/trilug/wes%40xitechusa.com
> > Welcome to TriLUG: https://trilug.org/welcome
> --
> This message was sent to: raubvogel at gmail.com <raubvogel at gmail.com>
> To unsubscribe, send a blank message to trilug-leave at trilug.org from that address.
> TriLUG mailing list : https://www.trilug.org/mailman/listinfo/trilug
> Unsubscribe or edit options on the web  : https://www.trilug.org/mailman/options/trilug/raubvogel%40gmail.com
> Welcome to TriLUG: https://trilug.org/welcome