[TriLUG] RoadRunner help

[Nathan Conrad]

I have never used RR, but as I remember one had to use a rrlogin program. 
Is this step still necessary?

Web sites:

http://www.seawood.org/rr/linux-setup.html

http://people.qualcomm.com/karn/rr/linux.html

-Nathan

--On Sunday, August 26, 2001 22:01 -0400 Christopher Knowles 
<knowlesc at telocity.com> wrote:

> Of course, if the DHCP provided by your Distro doesn't work (and every so
> often RR seems to try to make things hard...), take a look at ISC's DHCP
> distribution, ftp://ftp.isc.org/isc/dhcp/  It's what I started using when
> I  couldn't get an IP using Pump.
>
> Also, make sure that any time you are unplugging your cable modem from
> one  host and plugging it into another that you reboot the cable modem.
>
> CJK
>
> On Sunday 26 August 2001 05:43 pm, you wrote:
>> All you should have to do is set your NIC that's connected to the cable
>> modem to do "DHCP", and it should work.
>>
>> RR doesn't provide static IPs, they use DHCP.
>>
>> --Wade
>>
>> On Sun, 26 Aug 2001, P. L. Charles Fischer wrote:
>> > Is there a HowTo for Linux and RoadRunner?  If so where can I find it.
>> > Or better what do I need to do and what are the IP address I need to
>> > get it to work.
>> >
>> > Thanks
>> > Charles
>> > ______________________________________________________________________
>> > ___ ___ P. L. Charles Fischer
>> > fischer at zedec.com VOX: 919.465.2306	800.894.0058
>> > ZEDEC Technologies                                         FAX:
>> > 919.465.2309
>> > ______________________________________________________________________
>> > ___ ___
>> >
>> > _______________________________________________
>> > TriLUG mailing list
>> > http://www.trilug.org/mailman/listinfo/trilug
> _______________________________________________
> TriLUG mailing list
> http://www.trilug.org/mailman/listinfo/trilug