[TriLUG] replacing a hard drive

[john broome]

On Wed, 2002-10-09 at 22:24, Ben Pitzer wrote:
 
> As for self-installs, just make sure your network card works, then plug
> the coax into your cable modem, power the modem on, jack your CPE into
> the modem, and see if the CPE gets an IP.  If it does, you're good to
> go.  If not, send email to TriLUG, and there will be plenty of folks to
> help.


How am I going to email without an IP?  :)