[TriLUG] Big time Newbie question No.99

dsandif dsandif at email.unc.edu
Wed May 14 08:27:37 EDT 2003


Hi Guys, got a question for you,

I have a Dell Inspirion 8000  laptop witha dual boot setup. Originally ,

it had Linux 7.2 and Win98 on it, but we just upgraded the Linux side to

RedHat Linux 8.0. Now when it boots up, it will go through its check ok,

but when it brings up the login command line,
***********************************
RedHAt Linux 8.0 (Psyche)
Kernel 2.4.18-14 on an i686

benioff login:
***********************************


the screen starts to flicker 2 or 3 times, then it goes into a blue
background with a grey window that has the following message:

***********************************************************************************************************************

"I cannot start the X server (your graphical
interface). It is likely  that it is not set up correctly.
Would you like to view the X server
output to diagnose the problem?"

At this point I say "yes" and I then get the next menu:

************************************************************************************************************************




XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) /X Window Syste
(protocol Version 11, revision 0, vender release 6600)
Release Date: 23 January 2002
         If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
         reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-11smp i686 [ELF]
Build Host: daffy.perf.redhat.com

Module Loader present
OS Kernel: Linux version 2.4.18-14 (bhcompile at stripples.devel.redhat.com

Markers: (--) probed, (**) from config line, (==) default setting,
              (++) from command line, (!!) notice, (II) informational,
              (WW) warning, (EE) error, (NI) not implemented, (??)
unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue May 13 08:55:08 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Sharp LQ150U1LH22
Color, Single, TFT
(EE) R128(0): No valid modes found
(EE) Screens(s) found, but none have a uasble configuration.

Fatal server error:
no screens found

***********************************************************************************************************************

the next window ask me the following:

 Would you like to try to run  the X configruation program?
Note that you will need the root password for this.
**********************************************************************************************************************

When I try this, this is what I get:

**********************************************************************************************************************

*ddcprobe returned bogus values:
ID: None
Name: None
Horizsync: None
VertiSync: None

Couldn't start X server, trying with a fresh configuration
************************************************************************************************************************

After trying this twice, it will say that it is going to try and restart

the X server again and then the whole cycle starts again

I am including the Log file, XFree86.0.log so you can see the full log
message.

Thanks,

D-





XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window
System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-11smp i686 [ELF]
Build Host: daffy.perf.redhat.com

Module Loader present
OS Kernel: Linux version 2.4.18-14
(bhcompile at stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red
Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue May 13 12:35:35 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Rage 128 Mobility"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
        XFree86 ANSI C Emulation: 0.1
        XFree86 Video Driver: 0.5
        XFree86 XInput driver : 0.3
        XFree86 Server Extension : 0.1
        XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 02 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 02 class 06,04,00
hdr 01
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 02 class 06,04,00
hdr 01
(II) PCI: 00:1f:0: chip 8086,244c card 0000,0000 rev 02 class 06,01,00
hdr 80
(II) PCI: 00:1f:1: chip 8086,244a card 8086,4541 rev 02 class 01,01,80
hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 02 class 0c,03,00
hdr 00
(II) PCI: 01:00:0: chip 1002,4d46 card 1028,00a4 rev 00 class 03,00,00
hdr 00
(II) PCI: 02:03:0: chip 125d,1998 card 1028,00a4 rev 10 class 04,01,00
hdr 00
(II) PCI: 02:06:0: chip 11c1,0448 card 1668,2000 rev 01 class 07,80,00
hdr 00
(II) PCI: 02:0f:0: chip 104c,ac42 card e000,0000 rev 00 class 06,07,00
hdr 82
(II) PCI: 02:0f:1: chip 104c,ac42 card f400,0000 rev 00 class 06,07,00
hdr 82
(II) PCI: 02:0f:2: chip 104c,8027 card 1028,00a4 rev 00 class 0c,00,10
hdr 80
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1  0x0000c000 - 0x0000c0ff (0x100) IX[B]
        [1] -1  0x0000c400 - 0x0000c4ff (0x100) IX[B]
        [2] -1  0x0000c800 - 0x0000c8ff (0x100) IX[B]
        [3] -1  0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
        [0] -1  0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
        [0] -1  0xe8000000 - 0xebffffff (0x4000000) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x06 (VGA_EN is
cleared)
(II) Bus 2 I/O range:
        [0] -1  0x0000e000 - 0x0000e0ff (0x100) IX[B]
        [1] -1  0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [2] -1  0x0000e800 - 0x0000e8ff (0x100) IX[B]
        [3] -1  0x0000ec00 - 0x0000ecff (0x100) IX[B]
        [4] -1  0x0000f000 - 0x0000f0ff (0x100) IX[B]
        [5] -1  0x0000f400 - 0x0000f4ff (0x100) IX[B]
        [6] -1  0x0000f800 - 0x0000f8ff (0x100) IX[B]
        [7] -1  0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
        [0] -1  0xf4000000 - 0xfbffffff (0x8000000) MX[B]
(II) Bus 2 prefetchable memory range:
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is
set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) ATI Rage 128 Mobility MF rev 0, Mem @ 0xe8000000/26,
0xfcffc000/14, I/O @ 0xcc00/8
(II) Addressable bus resource ranges are
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
        [0] -1  0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
        [1] -1  0xf8ffd000 - 0xf8ffd7ff (0x800) MX[B]
        [2] -1  0xf8ffdc00 - 0xf8ffdcff (0x100) MX[B]
        [3] -1  0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
        [4] -1  0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
        [5] -1  0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
        [6] -1  0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
        [7] -1  0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [8] -1  0x0000e8f8 - 0x0000e8ff (0x8) IX[B]
        [9] -1  0x0000ec00 - 0x0000ecff (0x100) IX[B]
        [10] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
        [11] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [12] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
        [1] -1  0xf8ffd000 - 0xf8ffd7ff (0x800) MX[B]
        [2] -1  0xf8ffdc00 - 0xf8ffdcff (0x100) MX[B]
        [3] -1  0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
        [4] -1  0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
        [5] -1  0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
        [6] -1  0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
        [7] -1  0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [8] -1  0x0000e8f8 - 0x0000e8ff (0x8) IX[B]
        [9] -1  0x0000ec00 - 0x0000ecff (0x100) IX[B]
        [10] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
        [11] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [12] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
        [6] -1  0xf8ffd000 - 0xf8ffd7ff (0x800) MX[B]
        [7] -1  0xf8ffdc00 - 0xf8ffdcff (0x100) MX[B]
        [8] -1  0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
        [9] -1  0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
        [10] -1 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
        [11] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
        [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
        [14] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [15] -1 0x0000e8f8 - 0x0000e8ff (0x8) IX[B]
        [16] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
        [17] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
        [18] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [19] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 0.0.2
        ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.13.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 4.0.1
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 6.4.8
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
        ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK
(PCI),
        ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
        ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
        ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
        ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL
(AGP),
        ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),

        ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
        ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
        ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LX (AGP),
        ATI Radeon Mobility LY (AGP), ATI Radeon Mobility LZ (AGP),
        ATI Radeon 8500 QL (AGP), ATI Radeon 8500 QN (AGP),
        ATI Radeon 8500 QO (AGP), ATI Radeon 8500 Ql (AGP),
        ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Mobility MF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
        [6] -1  0xf8ffd000 - 0xf8ffd7ff (0x800) MX[B]
        [7] -1  0xf8ffdc00 - 0xf8ffdcff (0x100) MX[B]
        [8] -1  0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
        [9] -1  0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
        [10] -1 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
        [11] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
        [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
        [14] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [15] -1 0x0000e8f8 - 0x0000e8ff (0x8) IX[B]
        [16] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
        [17] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
        [18] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [19] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) resource ranges after probing:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
        [6] -1  0xf8ffd000 - 0xf8ffd7ff (0x800) MX[B]
        [7] -1  0xf8ffdc00 - 0xf8ffdcff (0x100) MX[B]
        [8] -1  0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
        [9] -1  0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
        [10] -1 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
        [11] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
        [12] 0  0x000a0000 - 0x000affff (0x10000) MS[B]
        [13] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [14] 0  0x000b8000 - 0x000bffff (0x8000) MS[B]
        [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
        [17] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [18] -1 0x0000e8f8 - 0x0000e8ff (0x8) IX[B]
        [19] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
        [20] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
        [21] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [22] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
        [23] 0  0x000003b0 - 0x000003bb (0xc) IS[B]
        [24] 0  0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Mobility MF (AGP)" (ChipID =
0x4d46)
(--) R128(0): Linear framebuffer at 0xe8000000
(--) R128(0): MMIO registers at 0xfcffc000
(--) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(II) R128(0): Panel size: 1600x1200
(II) R128(0): Panel ID: Sharp LQ150U1LH22
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2700 rd=12 min=12500 max=25000;
xclk=10500
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 32768 kB
(II) R128(0): VESA VBE OEM: ATI MOBILE M4
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: M4
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Monitor0: Using hsync range of 31.50-48.50 kHz
(II) R128(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using mode "1400x1050" (no mode of this name)
(II) R128(0): Not using mode "1400x1050" (no mode of this name)
(II) R128(0): Not using mode "1400x1050" (no mode of this name)
(II) R128(0): Not using mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "720x400" (no mode of this name)
(II) R128(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (no mode of this name)
(II) R128(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (no mode of this name)
(II) R128(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (no mode of this name)
(II) R128(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "832x624" (no mode of this name)
(II) R128(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1024" (no mode of this name)
(II) R128(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1200" (no mode of this name)
(II) R128(0): Not using default mode "960x600" (bad mode
clock/interlace/doublescan)
(WW) R128(0): Mode pool is empty
(EE) R128(0): No valid modes found
(II) UnloadModule: "ati"
(II) UnloadModule: "ddc"
(II) UnloadModule: "vbe"
(II) Unloading /usr/X11R6/lib/modules/libvbe.a
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.a
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(II) UnloadModule: "r128"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86 at xfree86.org.





More information about the TriLUG mailing list