[TriLUG] (~OT) RoadRunner Network Config

[Matt Pusateri]

John Broome wrote:
> On 9/5/07, Craig Taylor <ctalkobt at gmail.com> wrote:
>   
>> I recently had a RR-Net install (with Voice - AT&T is going down-hill
>> quick).  The installer took over 3 hours so I left after a bit of time. He
>> claimed that the RR device was a simple plug-and-go ... as long as I had my
>> router set to DHCP (WRT-54llg v6) it should work.
>>
>> It doesn't.
>>
>> He also claims there is no config address to configure the cable modem. I'm
>> using the 192.168.0.X network instead of the standard 192.168.1.X and
>> suspect that it my problem. I'll try changing it when I get home later
>> tonight. He claimed it works with his laptop (Win XP) direct I told my wife
>> to send him home.
>>
>>     
>
> IIRC the ip address of the cable modem is 192.168.0.100.  Your cable
> modem might be in the range your router is handing out and that could
> be FUBARing things.
>
>   
I believe the modem actually sits at 192.168.100.1

 Matt P.