[TriLUG] (~OT) RoadRunner Network Config

John Broome jbroome at gmail.com
Wed Sep 5 17:07:17 EDT 2007


On 9/5/07, Craig Taylor <ctalkobt at gmail.com> wrote:
> I recently had a RR-Net install (with Voice - AT&T is going down-hill
> quick).  The installer took over 3 hours so I left after a bit of time. He
> claimed that the RR device was a simple plug-and-go ... as long as I had my
> router set to DHCP (WRT-54llg v6) it should work.
>
> It doesn't.
>
> He also claims there is no config address to configure the cable modem. I'm
> using the 192.168.0.X network instead of the standard 192.168.1.X and
> suspect that it my problem. I'll try changing it when I get home later
> tonight. He claimed it works with his laptop (Win XP) direct I told my wife
> to send him home.
>

IIRC the ip address of the cable modem is 192.168.0.100.  Your cable
modem might be in the range your router is handing out and that could
be FUBARing things.

-- 
There are three R's to windows tech support: "Restart, Reboot, Reinstall"



More information about the TriLUG mailing list