[TriLUG] Storage server diy

William Sutton via TriLUG trilug at trilug.org
Fri Aug 2 17:13:27 EDT 2019


I've only used the 72k rpm spinning disks, so can't speak outside of that. 
But I've used IDE, SCSI, and SATA from the late 1990's through today.

William Sutton

On Fri, 2 Aug 2019, Hariharan Gopalan via TriLUG wrote:

> What about SAS 12GB/s SSD drives? Do they help improve performance? Also,
> do SSD drives have 4Kn versions? or are these only for the conventional
> drives with platters?
>
> On Fri, Aug 2, 2019 at 5:06 PM William Sutton <william at trilug.org> wrote:
>
>> I've had good luck with several generations of IBM (later HDS) hard
>> drives, some lasting a decade or more in continuous operation.
>>
>> William Sutton
>>
>> On Fri, 2 Aug 2019, Wes Garrison via TriLUG wrote:
>>
>> > I've done this several times over the last few years, and I'd be happy to
>> > help
>> >
>> > Generally, depending on size, I think ZFS on Debian or *buntu is the best
>> > thing going, with 2x or 3x fault tolerance.
>> >
>> > 10TiB drives are the best bang for the buck right now as far as $/GB is
>> > concerned.  You definitely want to get the NAS variant of drives, like WD
>> > Red or Hitachi/HGST NAS.
>> >
>> > Regular drives aren't meant to run 24x7, and they fail at very high
>> rates.
>> >
>> > I'd look at something like the Norco enclosures for this as well:
>> > https://www.newegg.com/norco-ds-12d/p/N82E16816133044
>> >
>> https://www.amazon.com/Silverstone-3-5-Inch-Hot-Swap-Rackmount-RM212/dp/B00S0M4D8U/
>> >
>> >
>> > These are the cheap ones, and you may want to replace with quieter fans,
>> > check solder joints, etc. unless you have the budget for expensive cases.
>> > _________________________________
>> > Wesley S. Garrison
>> > Network Engineer
>> > Xitech Communications, Inc.
>> > phone:  (919) 260-0803
>> > fax:       (919) 932-5051
>> > __________________________________
>> > "Lead us not into temptation, but deliver us from email."
>> >
>> >
>> > On Fri, Aug 2, 2019 at 4:07 PM Hariharan Gopalan via TriLUG <
>> > trilug at trilug.org> wrote:
>> >
>> >> Is there any storage server expert in the group who can help me with
>> this?
>> >>
>> >> Thanks
>> >> Hari
>> >> --
>> >> This message was sent to: Wes <wes at xitechusa.com>
>> >> To unsubscribe, send a blank message to trilug-leave at trilug.org from
>> that
>> >> address.
>> >> TriLUG mailing list : https://www.trilug.org/mailman/listinfo/trilug
>> >> Unsubscribe or edit options on the web  :
>> >> https://www.trilug.org/mailman/options/trilug/wes%40xitechusa.com
>> >> Welcome to TriLUG: https://trilug.org/welcome
>> > --
>> > This message was sent to: William <william at trilug.org>
>> > To unsubscribe, send a blank message to trilug-leave at trilug.org from
>> that address.
>> > TriLUG mailing list : https://www.trilug.org/mailman/listinfo/trilug
>> > Unsubscribe or edit options on the web        :
>> https://www.trilug.org/mailman/options/trilug/william%40trilug.org
>> > Welcome to TriLUG: https://trilug.org/welcome
>>
> -- 
> This message was sent to: William <william at trilug.org>
> To unsubscribe, send a blank message to trilug-leave at trilug.org from that address.
> TriLUG mailing list : https://www.trilug.org/mailman/listinfo/trilug
> Unsubscribe or edit options on the web	: https://www.trilug.org/mailman/options/trilug/william%40trilug.org
> Welcome to TriLUG: https://trilug.org/welcome


More information about the TriLUG mailing list